Cary Accounting LLC · Small-business tax guide · November 7, 2026

A cabinetmaker gets a December quote for a new machine. The salesperson points out that the entire purchase may be deductible this year. The shop owner has three better questions. Will the machine be ready to run by December 31? How much cash will the deduction actually free up? And if a larger contract starts next year, would some of that deduction be worth more then?

Matthew Stephens operates a band saw aboard USS Ronald Reagan, December 2005. Photograph by Aaron Burden, U.S. Navy, via Wikimedia Commons.

Assume the machine costs $60,000 and every dollar deducted this year would otherwise be taxed at 24%. A full deduction reduces federal income tax by $14,400. The shop still bears $45,600 of purchase cost after that tax benefit, before financing, operating expenses and resale. If the shop would eventually deduct the same $60,000 over several years, only part of the $14,400 represents an advantage from choosing the immediate write-off.

The decision starts with what the business bought. Then it turns on when the owner can use the deduction, what tax it offsets, and what happens when the asset leaves the business.

Jump to a section

From invoice to depreciable basis

Depreciation allows a business to recover the cost of a qualifying asset over time. For federal tax purposes, equipment generally must be owned by the taxpayer, used in a business or income-producing activity, and expected to last more than one year. A tax basis is the amount of investment the tax rules recognize. A machine with a $53,000 purchase price, $2,000 freight and $5,000 necessary installation generally starts with $60,000 of basis, assuming no rebates, credits or personal use. A down payment of $12,000 and a bona fide equipment loan for $48,000 can produce the same basis. Loan principal payments do not create a second deduction. [1]

Placed in service means ready and available for the work the owner bought it to do. A December delivery that still needs an electrician’s January installation generally starts depreciation in January. A fully installed machine ready in December can qualify that year even if the first customer order runs in January. Retain the installation or acceptance record along with the invoice. This date matters even to a cash-basis taxpayer. [1]

Tax depreciation follows statutory rules. Financial statements may instead spread the machine’s cost over its estimated useful life and account for residual value. The used-equipment market supplies a third number, its resale price. A machine can have zero federal tax basis, remain on the company’s books and still command a good price.

Before adding something to the depreciation schedule, check the invoice. Ordinary maintenance may be currently deductible. A betterment, restoration or adaptation to a new use generally requires capitalization. Inventory follows inventory rules, and land itself cannot be depreciated. For small purchases, the annual de minimis safe harbor may allow expensing of items up to $2,500 per invoice or separately substantiated item without an applicable financial statement, or $5,000 with one. A qualifying expensing policy must exist at the start of the year, the books must follow it, and the taxpayer attaches the election to a timely original return including extensions. The applicable-financial-statement route requires written procedures. [1] [2]

Three ways to recover the cost

Federal treatment Where the owner has discretion What can limit the result
Section 179 Elect a dollar amount for identified qualifying purchases. Select different amounts for different assets. Annual investment and deduction limits, active-business income, eligible purchase and business use.
Bonus depreciation, §168(k) Generally automatic for eligible basis. Elect out by property class for the tax year. Acquisition and service dates, asset type, prior use, related parties and other eligibility rules.
Regular MACRS depreciation Apply the assigned recovery period and convention. Permitted straight-line or alternative-system elections can change timing. The asset’s class, its use and mandatory rules constrain the choice.
Section 179
Where the owner has discretionElect a dollar amount for identified qualifying purchases. Select different amounts for different assets.
What can limit the resultAnnual investment and deduction limits, active-business income, eligible purchase and business use.
Bonus depreciation, §168(k)
Where the owner has discretionGenerally automatic for eligible basis. Elect out by property class for the tax year.
What can limit the resultAcquisition and service dates, asset type, prior use, related parties and other eligibility rules.
Regular MACRS depreciation
Where the owner has discretionApply the assigned recovery period and convention. Permitted straight-line or alternative-system elections can change timing.
What can limit the resultThe asset’s class, its use and mandatory rules constrain the choice.

Section 179 works well when an owner wants to choose the size of this year’s deduction. Typical candidates include purchased new or used machinery, computers, furniture and qualifying off-the-shelf software used predominantly in an active trade or business. Certain improvements to nonresidential real property qualify by election, including qualifying roofs, HVAC, fire protection, alarms and security systems installed after the building was first placed in service. The building purchase itself generally falls outside Section 179. Gifts, inheritances and certain related-party acquisitions fail the purchase test. [1] [3]

For tax years beginning in 2026, the maximum federal election is $2,560,000. The maximum falls dollar for dollar once qualifying property put in service exceeds $4,090,000. A business placing $4,500,000 in service loses $410,000 of capacity, leaving $2,150,000 before the income limit. The investment test counts qualifying purchases even if the business elects Section 179 on only a few. A deduction blocked by the active-business-income limit generally carries forward. Partnerships and S corporations apply limits at the entity level, and the owners apply limits again. An individual’s qualifying active-business income can include wages, including a spouse’s wages on a joint return. [1] [3] [4]

Bonus depreciation generally deducts 100% of remaining eligible basis for qualifying property acquired and placed in service after January 19, 2025. Many assets with MACRS recovery periods of 20 years or less qualify, as can certain software and qualified improvement property. Used equipment can qualify when the purchaser and acquisition meet the prior-use and related-party rules. Bonus has no Section 179 annual investment ceiling or active-income cap. It can create a tax loss, though separate loss rules determine when the owner can use it. A timely election out generally covers the entire class placed in service that tax year. Two eligible five-year computers in the same class cannot ordinarily receive opposite bonus elections merely because the owner prefers it. [5] [6] [7]

Apply the rules in order. Subtract Section 179 first, then bonus from the eligible remainder, then regular depreciation on the balance. On a $60,000 five-year asset, electing $20,000 of Section 179 and leaving 100% bonus in place ordinarily deducts the entire $60,000. To preserve future deductions, assume the business elects out of bonus for that class and qualifies for the half-year convention. First-year regular depreciation is 20% of $40,000, or $8,000. The combined first-year deduction is $28,000, leaving $32,000 for later. Check what the class election does to every other purchase that year. [1] [5]

How much freedom do you have to slow depreciation?

The Modified Accelerated Cost Recovery System (MACRS) assigns a class according to the asset and, in some cases, the activity in which the business uses it. Computers generally fall in the five-year class and office furniture generally in the seven-year class. Many equipment classes use declining-balance depreciation under the general depreciation system, switching to straight line when that yields a larger deduction. That front-loading is accelerated depreciation. “Advanced depreciation” is informal wording you may hear for early cost recovery. [1] [6]

An owner cannot turn a five-year computer into a ten-year asset by estimating it will last a decade. After addressing bonus, a taxpayer may elect straight line over the applicable general-system period for a class, or elect the alternative depreciation system (ADS), which generally uses straight line and may prescribe a longer period. ADS is mandatory in some circumstances, including certain property used predominantly outside the United States. Election scope and reversibility matter. Ask for the actual class life and a schedule before making the election. [1] [6]

The convention determines how much of a year counts when property enters or leaves service. The common half-year convention treats equipment as placed in service at midyear. Five-year equipment then produces deductions on six calendar-year returns. The mid-quarter convention generally applies when more than 40% of the relevant MACRS basis placed in service for the year falls in the final three months. Exclusions and the basis calculation matter. A large December order can change the timing for other assets too. Buildings generally use the mid-month convention. [1] [6]

Vehicles need their own calculation. Passenger-auto limits can restrict even a 100% bonus deduction. Many heavy SUVs over 6,000 and up to 14,000 pounds gross vehicle weight rating have a separate $32,000 federal Section 179 cap for tax years beginning in 2026. Certain vehicle configurations are excepted. Eligible remaining basis may still qualify for bonus. A $70,000 SUV used 70% for qualifying business starts with $49,000 of business basis before other limits. Verify the manufacturer’s weight rating, configuration, mileage log and prior mileage-method elections before relying on a dealer’s estimate. [1] [4] [8]

Why advice from a few years ago sounds different

Period Federal rule for typical eligible equipment
Late 2017–2022 The 2017 Tax Cuts and Jobs Act generally provided 100% bonus for qualifying acquisitions after September 27, 2017, placed in service through 2022. Qualifying used equipment became eligible.
2023 and 2024 The scheduled bonus percentage fell to 80% and then 60%. In 2024 the Section 179 maximum was $1.22 million and the investment threshold was $3.05 million.
2025 Public Law 119-21, signed July 4, restored 100% bonus without a scheduled phaseout for eligible acquisitions and placements after January 19. The Section 179 maximum rose to $2.5 million and the threshold to $4 million for tax years beginning in 2025.
2026 New eligible purchases generally retain 100% bonus. Inflation indexing moves the Section 179 maximum and threshold to $2.56 million and $4.09 million.
Late 2017–2022
Federal rule for typical eligible equipmentThe 2017 Tax Cuts and Jobs Act generally provided 100% bonus for qualifying acquisitions after September 27, 2017, placed in service through 2022. Qualifying used equipment became eligible.
2023 and 2024
Federal rule for typical eligible equipmentThe scheduled bonus percentage fell to 80% and then 60%. In 2024 the Section 179 maximum was $1.22 million and the investment threshold was $3.05 million.
2025
Federal rule for typical eligible equipmentPublic Law 119-21, signed July 4, restored 100% bonus without a scheduled phaseout for eligible acquisitions and placements after January 19. The Section 179 maximum rose to $2.5 million and the threshold to $4 million for tax years beginning in 2025.
2026
Federal rule for typical eligible equipmentNew eligible purchases generally retain 100% bonus. Inflation indexing moves the Section 179 maximum and threshold to $2.56 million and $4.09 million.

There are two timelines for older orders. Ordinary qualified equipment acquired before January 20, 2025, can remain on the old schedule, generally 40% if placed in service in 2025 and 20% in 2026. A binding contract or self-constructed asset can require a closer acquisition-date analysis. The 2025 law also allowed a transition election to use 40% instead of 100% for ordinary eligible property in the first tax year ending after January 19, 2025. Give the accountant the signed order as well as the delivery and commissioning dates. Special rules apply to certain aircraft and longer-production-period property. [4] [5] [9] [10]

Case study 1 · A $60,000 purchase across six returns

A design studio buys a $60,000 computer system. Assume all components in this example qualify as five-year property, the studio uses them entirely for business, and the half-year convention applies. It keeps the equipment throughout recovery. Compare full first-year expensing with electing out of bonus and using ordinary MACRS. Each method eventually deducts $60,000. The available cash follows different schedules. [1]

Annual federal deductions for the same $60,000 system.
Annual federal deductions for the same $60,000 system.
2026
Full expensing$60,000
Five-year MACRS$12,000
2027
Full expensing$0
Five-year MACRS$19,200
2028
Full expensing$0
Five-year MACRS$11,520
2029
Full expensing$0
Five-year MACRS$6,912
2030
Full expensing$0
Five-year MACRS$6,912
2031
Full expensing$0
Five-year MACRS$3,456
Tax year Full expensing Five-year MACRS MACRS tax reduction at 24%
2026 $60,000 $12,000 $2,880
2027 $0 $19,200 $4,608
2028 $0 $11,520 $2,765
2029 $0 $6,912 $1,659
2030 $0 $6,912 $1,659
2031 $0 $3,456 $829
Total $60,000 $60,000 $14,400
2026
Full expensing$60,000
Five-year MACRS$12,000
MACRS tax reduction at 24%$2,880
2027
Full expensing$0
Five-year MACRS$19,200
MACRS tax reduction at 24%$4,608
2028
Full expensing$0
Five-year MACRS$11,520
MACRS tax reduction at 24%$2,765
2029
Full expensing$0
Five-year MACRS$6,912
MACRS tax reduction at 24%$1,659
2030
Full expensing$0
Five-year MACRS$6,912
MACRS tax reduction at 24%$1,659
2031
Full expensing$0
Five-year MACRS$3,456
MACRS tax reduction at 24%$829
Total
Full expensing$60,000
Five-year MACRS$60,000
MACRS tax reduction at 24%$14,400

Suppose the studio’s owner can use every deduction at a flat 24% marginal rate. Full expensing saves $14,400 at the first tax settlement. Regular MACRS saves the same $14,400 in nominal dollars. But a dollar of tax saved next year cannot fund payroll today. At an illustrative 8% annual discount rate, the six MACRS tax reductions are worth $12,618 at the first settlement date. Full expensing is worth $14,400 at that date. The value of accelerating the deductions is $1,782 under these assumptions.

To reproduce the calculation, multiply each unrounded annual deduction by 24%, then divide by 1.08 raised to the number of years after the first settlement. For example, $4,608 received one year later is worth $4,267 at that date. Add all six present values. An owner using a line of credit may choose an after-tax borrowing rate for this comparison. An owner with cash on hand might instead use the return available on the next best use of the cash. Use comparable after-tax rates and settlement dates throughout.

Change one fact. Suppose each deductible dollar offsets tax at 12% in 2026 and 32% in the following five years. Full expensing now saves $7,200. MACRS saves $1,440 in 2026 plus $15,360 over the remaining years, or $16,800 nominally. Its present value at 8% is $14,424, about $7,224 more than immediate expensing. This is a sensitivity test. An actual deduction may span multiple brackets, and qualified business income, self-employment tax, credits or loss limits can change the effective marginal savings. Request a calculation of total tax under each alternative.

Case study 2 · When a paper loss will not pay the equipment loan

A new repair shop has $25,000 of income before its $80,000 equipment purchase. Assume the active-business-income limit is $25,000 after considering all relevant income, the asset qualifies, and no other depreciation affects the example. If the business elects Section 179 on the full $80,000, the income limit allows $25,000 currently and generally leaves $55,000 of elected cost to carry forward. That $55,000 is already assigned to Section 179. It cannot also generate a bonus deduction. [1] [3]

If the business elects no Section 179 and takes full bonus instead, the $80,000 deduction produces a $55,000 business loss before other limits. For a pass-through owner, the immediate benefit depends on basis, amount at risk, participation, other income and the excess business loss rules. A suspended loss or net operating loss carryforward may provide its tax benefit later. Cash still leaves the bank for the down payment and debt service on schedule. [7]

The accountant should model the owner’s whole return twice. A working spouse’s wages may increase Section 179 capacity on a joint return. A passive owner may have little passive income to absorb a bonus-generated loss. An owner expecting full-rate taxable income next year may prefer a partial Section 179 election plus regular depreciation on the balance. The combination needs an appropriate bonus election for the class. [1] [5] [7]

Case study 3 · A profitable resale after the write-off

A contractor buys a machine for $60,000, takes a full federal deduction, and later sells it in an arm’s-length cash sale for $25,000. Assume exclusive business use, no selling costs, a holding period over one year and no other adjustments. Adjusted basis is original basis reduced by depreciation allowed or allowable. Here it is zero. The contractor’s $25,000 proceeds therefore produce $25,000 of gain. For this ordinary Section 1245 equipment sale, gain up to prior depreciation is generally ordinary income. That reclassification is depreciation recapture. Regular depreciation can be recaptured too. [11]

On the same $25,000 sale Fully expensed Partly depreciated
Original basis $60,000 $60,000
Depreciation through sale, assumed $60,000 $40,000
Adjusted tax basis $0 $20,000
Gain and ordinary recapture $25,000 $5,000
Prior deductions less recaptured income $35,000 $35,000
Original basis
Fully expensed$60,000
Partly depreciated$60,000
Depreciation through sale, assumed
Fully expensed$60,000
Partly depreciated$40,000
Adjusted tax basis
Fully expensed$0
Partly depreciated$20,000
Gain and ordinary recapture
Fully expensed$25,000
Partly depreciated$5,000
Prior deductions less recaptured income
Fully expensed$35,000
Partly depreciated$35,000

At a constant 24% rate, full expensing saved $14,400 initially and creates $6,000 of federal income tax on sale. The net nominal tax reduction is $8,400. Partial depreciation saved $9,600 through the sale and creates $1,200 of tax at sale, also netting $8,400. That equals 24% of the machine’s $35,000 decline in value. The $40,000 accumulated figure is assumed to illustrate basis. A real return must calculate depreciation through the disposition date using the applicable convention. [1] [11]

If the fully expensed machine sells for $70,000, the first $60,000 of gain is generally ordinary recapture. The remaining $10,000 generally enters the Section 1231 computation, where netting and the five-year lookback can affect character. If proceeds fall below adjusted basis, there is generally a loss and no gain to recapture on that sale. Skipping an allowable deduction can still reduce basis. Keep the depreciation schedule and consult the preparer about correcting omissions. Form 4797 generally reports the business sale. [11] [12]

Business use can trigger recapture without a sale. If Section 179 property drops to 50% or less business use before the recovery period ends, generally include in income the excess of Section 179 claimed over depreciation that would otherwise have been allowable. Listed property such as a mixed-use vehicle has additional tests and can require recomputation under ADS. Track actual use each year, including when an owner takes a work vehicle home for personal use. [1] [8] [12]

Case study 4 · Why North Carolina changes the choice

Consider a North Carolina sole proprietor who places one $60,000 eligible machine in service in 2026. Assume it is the only qualifying purchase, the owner has sufficient active income, and each option yields a full $60,000 federal deduction. North Carolina updated its federal conformity date to July 5, 2025, under Session Law 2026-31 and retains specific depreciation adjustments. Work through the state calculation before setting aside cash for estimated taxes. [13] [14]

State calculation Federal Section 179 only Federal bonus only
Federal deduction $60,000 $60,000
Amount subject to the 85% add-back $35,000 $60,000
Addition to North Carolina income $29,750 $51,000
Net first-year deduction reflected in NC income $30,250 $9,000
NC deduction in each of the next five years $5,950 $10,200
Federal deduction
Federal Section 179 only$60,000
Federal bonus only$60,000
Amount subject to the 85% add-back
Federal Section 179 only$35,000
Federal bonus only$60,000
Addition to North Carolina income
Federal Section 179 only$29,750
Federal bonus only$51,000
Net first-year deduction reflected in NC income
Federal Section 179 only$30,250
Federal bonus only$9,000
NC deduction in each of the next five years
Federal Section 179 only$5,950
Federal bonus only$10,200

For Section 179, North Carolina uses a $25,000 dollar limit and a $200,000 investment threshold. Here, $60,000 minus $25,000 leaves $35,000. Adding back 85% restores $29,750 to taxable income. Bonus uses 85% of the full $60,000 bonus deduction. Each of the next five years generally allows a deduction equal to 20% of the original add-back. In this case, using Section 179 instead of bonus reduces first-year North Carolina taxable income by an additional $21,250. Multiply by the applicable state tax rate to estimate the cash difference. [14] [15] [16]

North Carolina deductions for Section 179 and bonus on the same $60,000 purchase.
North Carolina deductions for Section 179 and bonus on the same $60,000 purchase.
2026
Section 179$30,250
Bonus depreciation$9,000
Each year, 2027–2031
Section 179$5,950
Bonus depreciation$10,200

When total qualifying purchases exceed $200,000, the state Section 179 amount phases down dollar for dollar. At $225,000 of qualifying purchases, the $25,000 state amount is exhausted. An entity with several owners or operations in multiple states needs a separate analysis. These state adjustments generally leave the asset’s federal and state basis equal. Keep an annual schedule of additions and future deductions by taxpayer and year, even when the federal equipment schedule shows zero basis. [14] [16]

Case study 5 · Buying a practice with equipment and goodwill

A buyer pays $200,000 for the operating assets of a professional practice on October 1 and begins operating that month. Assume a supportable purchase-price allocation of $20,000 to equipment, $60,000 to customer relationships and $120,000 to goodwill, with no other assets or liabilities. Each piece has its own cost-recovery rules. The equipment may qualify for a $20,000 first-year deduction. The $180,000 paid for relationships and goodwill generally falls under Section 197 amortization. [1] [17] [18]

Amortization spreads a qualifying intangible asset’s cost over the period prescribed for it. For these purchased Section 197 intangibles the period is 15 years, or 180 months, beginning in the month acquired when the trade or business is already operating. Here $180,000 ÷ 180 gives $1,000 per month. October through December produces $3,000 of first-year amortization, and a full subsequent year produces $12,000. With full equipment expensing, the combined first-year federal deduction is $23,000. Customer attrition exceeding the buyer’s forecast does not itself shorten the statutory period. [17]

In an applicable asset acquisition, buyer and seller generally report the allocation on Form 8594. The residual method allocates consideration among asset classes, with goodwill and going-concern value receiving the residual. Document fair market values and review the allocation together before signing. An earn-out that changes consideration may require a supplemental filing and basis adjustments. An equity purchase can have a different outcome because a purchase of shares alone generally gives the buyer basis in the shares. [18]

The word “software” on an invoice deserves a second look. Qualifying purchased off-the-shelf software may be eligible for Section 179. A monthly subscription providing access to a vendor’s platform is ordinarily a service expense over the period of service. Software acquired as part of a business acquisition may follow Section 197, subject to exceptions. Separate the license, subscription, implementation and support terms before assigning a tax life. [1] [17]

What to bring to your accountant

Start the conversation before committing to a year-end purchase if the tax outcome affects the financing or delivery decision. A useful opening is, “We expect this equipment to cost $60,000 installed and to be ready in December. We may sell it in three years. Could you show me our federal and North Carolina cash taxes with full expensing, partial Section 179 and regular depreciation through the expected sale?”

Bring this information Ask this question
Quote, signed order, invoice, freight, installation, rebates, financing or lease agreement What is our depreciable basis? Who is the tax owner? Does the contract date affect bonus eligibility?
Delivery, acceptance and installation records, plus asset description and intended use When was it ready and available? Which asset class, convention and expensing rules apply?
Current fixed-asset register, prior Form 4562, election statements and all planned purchases for the year Which other assets share the bonus election? Would a fourth-quarter purchase change their convention?
Mileage or usage logs, owner-use plans and vehicle weight rating What share qualifies, which caps apply and what happens if business use falls to 50%?
Current-year forecast, two or three years of projections, owner income and carryforwards How much tax will each alternative actually save on the owner’s return each year? What losses would be deferred?
Borrowing rate, loan payments, expected resale date and estimated proceeds What is the present value of each option after tax on resale? How much cash should we reserve?
States of operation, prior state add-back schedules and any proposed acquisition allocation What federal and state differences must we track, and which amounts are amortizable?
Quote, signed order, invoice, freight, installation, rebates, financing or lease agreement
Ask this questionWhat is our depreciable basis? Who is the tax owner? Does the contract date affect bonus eligibility?
Delivery, acceptance and installation records, plus asset description and intended use
Ask this questionWhen was it ready and available? Which asset class, convention and expensing rules apply?
Current fixed-asset register, prior Form 4562, election statements and all planned purchases for the year
Ask this questionWhich other assets share the bonus election? Would a fourth-quarter purchase change their convention?
Mileage or usage logs, owner-use plans and vehicle weight rating
Ask this questionWhat share qualifies, which caps apply and what happens if business use falls to 50%?
Current-year forecast, two or three years of projections, owner income and carryforwards
Ask this questionHow much tax will each alternative actually save on the owner’s return each year? What losses would be deferred?
Borrowing rate, loan payments, expected resale date and estimated proceeds
Ask this questionWhat is the present value of each option after tax on resale? How much cash should we reserve?
States of operation, prior state add-back schedules and any proposed acquisition allocation
Ask this questionWhat federal and state differences must we track, and which amounts are amortizable?

Ask for a one-page comparison showing cash tax by year, remaining basis, unused deductions and tax on the expected sale. If profits are uncertain, request a second run using a lower next-year forecast. If the purchase still makes business sense in that scenario, the discussion can turn to the amount and timing of the deduction with the operating decision already grounded in the numbers.

Sources and further reading

The numbered links throughout the article identify the authorities behind the rules. Case studies are hypothetical. Except where North Carolina is expressly modeled, calculations isolate federal income tax and assume the stated deductions are usable. Present values use annual settlement dates and unrounded figures.

  1. IRS Publication 946, How To Depreciate Property (especially chapters 1–5 and Appendix A)

  2. IRS, Tangible Property Final Regulations and de minimis safe harbor

  3. 26 U.S.C. §179, election to expense qualifying assets

  4. IRS Revenue Procedure 2025-32, 2026 inflation adjustments

  5. IRS Notice 2026-11, first-year bonus depreciation and transition rules

  6. 26 U.S.C. §168, accelerated cost recovery, elections and conventions

  7. IRS Instructions for Form 8582, coordination with other loss limitations

  8. IRS Publication 463, vehicle expenses, mileage and records

  9. U.S. House Report 118-127, historical bonus phase-down table

  10. IRS Publication 527 (2024), prior-year Section 179 and bonus limits

  11. IRS Publication 544, equipment sales, Section 1231 and depreciation recapture

  12. IRS Instructions for Form 4797, sales and business-use recapture

  13. NCDOR, FAQs Regarding Recent Session Law Changes, questions 11–12

  14. N.C. General Statutes §105-153.6, accelerated depreciation and expensing adjustments

  15. NCDOR, Adjustment for Bonus Depreciation

  16. NCDOR, Income Tax Adjustments for Code Section 179 Expenses

  17. 26 U.S.C. §197, amortization of goodwill and other intangibles

  18. IRS Instructions for Form 8594, asset acquisition reporting and allocation